Hinge Belt
The solution for the filtration and disposal of a variety of chip waste: long, short, curly/coiled, agglomerated.
Scraper bars are set on the chain plate belt. As the scraper bars rotate, chips are scraped off the bottom surface of the conveyor, gathering any small chips that may have fallen to the bottom of the chip conveyor.
The filter system then effectively filters out all the chips in the coolant and prevents chips from contaminating the water tank.
The filter system extends the coolant lifespan and eliminates waste buildup in the coolant tank, ensuring the continued trouble-free operation of the chip conveyor.
Scraper bars are set on the chain plate belt. As the scraper bars rotate, chips are scraped off the bottom surface of the conveyor, gathering any small chips that may have fallen to the bottom of the chip conveyor.
The filter system then effectively filters out all the chips in the coolant and prevents chips from contaminating the water tank.
The filter system extends the coolant lifespan and eliminates waste buildup in the coolant tank, ensuring the continued trouble-free operation of the chip conveyor.
Types
TRADITIONAL HINGE TYPE CHIP CONVEYOR
- Head conforms to CE safety regulations
- Uses a horizontal motor
- Head conforms to CE safety regulations (for chips longer than 550mm)
- Uses a horizontal motor
- Head conforms to CE safety regulations
- Uses a hollow shaft motor
- Head conforms to CE safety regulations
- Uses a hollow shaft motor
AESTHETIC CHAIN TYPE CHIP CONVEYOR
- Head conforms to CE safety regulations
- Uses a horizontal motor
- Head conforms to CE safety regulations
- Uses a hollow shaft motor
- Head is shorter than aesthetic type
- Head conforms to CE safety regulations
- Use a hollow shaft motor
- Standard head
- Use a hollow shaft motor
- Head conforms to CE safety regulations (for chip covers longer than 550mm).
- Uses a hollow shaft motor
- Head conforms to CE safety regulations
- Uses a hollow shaft motor
- Small footprint
Specifications
- 0.03~0.07m³/hr
- Less than 15m
- 0°, 45°, 60°
Belt Specification
| Belt Pitch(P) (mm) |
Belt Width(W) (mm) |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| 31.75 | W150 | W175 | W200 | W250 | W300 | W350 | W400 | W450 | W500 |
| 50.8 | - | - | W200 | W250 | W300 | W350 | W400 | W450 | W500 |
| 63.5 | - | - | W200 | W250 | W300 | W350 | W400 | W450 | W500 |
